KNX Snertuinngangur 4f.

KNX 4-föld Snertuinngangur

Flush-mounted binary inputs, can be used in deep device box (60 mm deep)
behind a conventional switch/push button, for connection of zero-voltage
contacts. The switching operations of zero-voltage contacts are converted into
KNX telegrams. The inputs can be assigned various functions or blocked
independently of each other in the process. The inputs can be parameterised as
outputs (max. 2 mA).

Features:
- Blocker for blocking individual inputs.
- Behaviour upon bus voltage recovery can be configured separately for each
input.
- Telegram rate limit.
- Two independent switching objects are available for each input and can be
released individually, command for leading and trailing edge can be set
independently (ON, OFF, CHANGE, no reaction), cyclical transmission of the
switching object depending on the edge or depending on the object value can be
selected.
- Single-surface and double-surface operation, time between dimming and
switching, and dim-step size can be set, telegram repetition, and stop
telegram transmission possible.
- Command can be set with rising edge (no function, UP, DOWN, CHANGE),
operating concept can be configured (Step - Move - Step or Move - Step), time
between short and long-term operation can be set, slat adjustment time can be
set.

Value transmitter and light scene auxiliary unit function:
- edge (button as NO contact, button as NC contact, switch) and value with
edge can be configured, value adjustment with button by pressing and holding
button for value transmitters possible, light scene auxiliary unit with memory
function and saving of the scene without previously calling up is possible.

Temperature value transmitter and brightness value transmitter function:
- edge and value configurable, value adjustment with push button is possible
by pressing and holding button.

Pulse counter function:
- edge for pulse counting and interval time for meter reading transfer can be
configured, edge of the synchronisation signal for resetting the meter reading
and switching telegram when synchronisation signal arrives can be set.

Function of switching counter:
- edge for counting the signals at the input and maximum meter reading
selectable, increment for the counter reading output and telegram when the
maximum meter reading is reached can be parameterised.

Function as switching output:
- Behaviour in case of bus failure and return, switch-on/off delay or time
switch function, output clocking (flashing of an LED).
- 4-gang flush-mounted binary input. The four inputs can be assigned various
functions or blocked independently of each other in the process. Two of the
four inputs can be parameterised as outputs (max. 2 mA).
- Free assignment of the functions switching, dimming, blind and value
transmitter to inputs 1 through 4 or pulse counters and switch counters to
inputs 1 and 2.

Technical data:
KNX medium: TP256
Ambient temperature: -5 °C to +45 °C
Number of inputs: 4
Connections
- KNX: Connection and junction terminal
- Input line: 5-wire cable set

Scope of supply:
- Connection and junction terminal for KNX included in the scope of supply.

Dimensions in mm:
43 x 28 x 15