KNX (One) Rofaliði innf. 1f. + 3 Binary

Rofaliði innfeldur

Einfaldur + 3 Bianary

KNX (One)

Features:

Function in the Gira One system
- Actuator for switching devices.
- 3 binary inputs for connection to conventional switches, buttons and motion
detectors with zero-voltage contacts.
- The inputs are used to control Gira One actuators or to record status
information.
- Connection to an external temperature sensor at input 3.
- Programming and start-up with the Gira Project Assistant (GPA), from
version 5.0.
- Encrypted data transfer between the Gira One devices.

Technical data:
Rated voltage: DC 21 to 32 V SELV
Switching capacity: AC 250 V, 16 AX
Maximum switch-on current: 800 A (200 µs), 165 A (20 ms)
Gira One Medium: Twisted pair (TP),YCYM 2 x 2 x 0.8
Test voltage: 4 kV (KNX/EIB bus line)
Connections
- Gira One Bus: Connection terminals to control line
- Inputs: Connection terminals to control line
- Load: Screw terminals
Connection cross section: Max. 4 mm²
Inputs
- Quantity: 3
Input type: Zero-voltage
Sampling voltage
- Auxiliary inputs: Approx. 5 V
Total length
- Auxiliary input cable: Max. 10 m
Connected load
- Ohmic load: 2500 W
- Capacitive load: 16 A, max. 140 µF
- Motors (blind or fan): 1380 W
- Light bulbs: 2300 W
- HV halogen lamps: 2300 W
- Fluorescent lamps, parallel-compensated: 1160 VA
- HV LED lamps: typically 400 W
- Wound electronic transformer: 1200 VA
- Tronic transformer: 1500 W
- Fluorescent lamps, uncompensated: 1000 VA
- Fluorescent lamps,lead-lag circuit: 2300 VA
Ambient temperature: -5 °C to +45 °C

Notes:
- Can be updated via the Gira Project Assistant (GPA).
- Refer to the Gira One System Manual for information on integrating and
installing zero-voltage contacts, motion detectors and presence detectors.